Azure Verified Modules (Community Fork)
Glossary GitHub GitHub Issues Toggle Dark/Light/Auto mode Toggle Dark/Light/Auto mode Toggle Dark/Light/Auto mode Back to homepage

Last updated: 20 Jun 2024

Terraform Specific Specification

Make sure to checkout the Shared Specification first before reading further so you understand the specifications items that are shared and agnostic to the IaC language/tool.
The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in RFC 2119.

This page contains the Terraform specific requirements for AVM modules (Resource and Pattern modules) that ALL Terraform AVM modules MUST meet. These requirements are in addition to the Shared Specification requirements that ALL AVM modules MUST meet.

Any updates to existing or new specifications for Terraform must be submitted as a draft for review by Azure Terraform PG/Engineering(@Azure/terraform-avm) and AVM core team(@Azure/avm-core-team).
Provider Versatility: Users have the autonomy to choose between AzureRM, AzAPI, or a combination of both, tailored to the specific complexity of module requirements.

The following table summarizes the category identification codes used in this specification:

ScopeFunctional requirementsNon-functional requirements
Shared requirements (resource & pattern modules)TFFRTFNFR
Resource module level requirementsN/AN/A
Pattern module level requirementsN/AN/A



Shared Requirements (Resource & Pattern Modules)

Listed below are both functional and non-functional requirements for Terraform AVM modules (Resource and Pattern).


Functional Requirements (TFFR)

This section includes Terraform specific, functional requirements (TFFR) for AVM modules (Resource and Pattern).


ID: TFFR1 - Category: Composition - Cross-Referencing Modules

Module owners MAY cross-references other modules to build either Resource or Pattern modules. However, they MUST be referenced only by a HashiCorp Terraform registry reference to a pinned version e.g.,

module "other-module" {
  source  = "Azure/xxx/azurerm"
  version = "1.2.3"
}

They MUST NOT use git reference to a module.

module "other-module" {
  source = "git::https://xxx.yyy/xxx.git"
}
module "other-module" {
  source = "github.com/xxx/yyy"
}

Modules MUST NOT contain references to non-AVM modules.

See Module Sources for more information.



ID: TFFR2 - Category: Outputs - Additional Terraform Outputs

Authors SHOULD NOT output entire resource objects as these may contain sensitive outputs and the schema can change with API or provider verisons. Instead, authors SHOULD output the computed attributes of the resource as discreet outputs. This kind of pattern protects against provider schema changes and is known as an anti-corruption layer.

Remember, you SHOULD NOT output values that are already inputs (other than name).

E.g.

# Resource output, computed attribute.
output "foo" {
  description = "MyResource foo attribute"
  value = azurerm_resource_myresource.foo
}

# Resource output for resources that are deployed using `for_each`. Again only computed attributes.
output "childresource_foos" {
  description = "MyResource childs' foo attributes"
  value = {
    for key, value in azurerm_resource_mychildresource : key => value.foo
  }
}

# Output of a sensitive attribute
output "bar" {
  description = "MyResource bar attribute"
  value     = azurerm_resource_myresource.bar
  sensitive = true
}



Non-Functional Requirements (TFNFR)

This section includes Terraform specific, non-functional requirements (TFNFR) for AVM modules (Resource and Pattern).


ID: TFNFR1 - Category: Documentation - Descriptions

Where descriptions for variables and outputs spans multiple lines. The description MUST provide variable input examples for each variable using the HEREDOC format and embedded markdown.

Example:

variable "my_complex_input" {
  type = map(object({
    param1 = string
    param2 = optional(number, null)
  }))
  description = <<DESCRIPTION
A complex input variable that is a map of objects.
Each object has two attributes:

- `param1`: A required string parameter.
- `param2`: (Optional) An optional number parameter.

Example Input:

```terraform
my_complex_input = {
  "object1" = {
    param1 = "value1"
    param2 = 2
  }
  "object2" = {
    param1 = "value2"
  }
}
```
DESCRIPTION
}



ID: TFNFR2 - Category: Documentation - Module Documentation Generation

Terraform modules documentation MUST be automatically generated via Terraform Docs.

A file called .terraform-docs.yml MUST be present in the root of the module and have the following content:

---
### To generate the output file to partially incorporate in the README.md,
### Execute this command in the Terraform module's code folder:
# terraform-docs -c .terraform-docs.yml .

formatter: "markdown document" # this is required

version: "0.16.0"

header-from: "_header.md"
footer-from: "_footer.md"

recursive:
  enabled: false
  path: modules

sections:
  hide: []
  show: []

content: |-
  {{ .Header }}

  <!-- markdownlint-disable MD033 -->
  {{ .Requirements }}

  {{ .Providers }}

  {{ .Resources }}

  <!-- markdownlint-disable MD013 -->
  {{ .Inputs }}

  {{ .Outputs }}

  {{ .Modules }}

  {{ .Footer }}  

output:
  file: README.md
  mode: replace
  template: |-
    <!-- BEGIN_TF_DOCS -->
    {{ .Content }}
    <!-- END_TF_DOCS -->    
output-values:
  enabled: false
  from: ""

sort:
  enabled: true
  by: required

settings:
  anchor: true
  color: true
  default: true
  description: false
  escape: true
  hide-empty: false
  html: true
  indent: 2
  lockfile: true
  read-comments: true
  required: true
  sensitive: true
  type: true



ID: TFNFR3 - Category: Contribution/Support - GitHub Repo Branch Protection

Module owners MUST set a branch protection policy on their GitHub Repositories for AVM modules against their default branch, typically main, to do the following:

  1. Requires a Pull Request before merging
  2. Require approval of the most recent reviewable push
  3. Dismiss stale pull request approvals when new commits are pushed
  4. Require linear history
  5. Prevents force pushes
  6. Not allow deletions
  7. Require CODEOWNERS review
  8. Do not allow bypassing the above settings
  9. Above settings MUST also be enforced to administrators
If you use the template repository as mentioned in the contribution guide, the above will automatically be set.



ID: TFNFR4 - Category: Composition - Code Styling - lower snake_casing

Module owners MUST use lower snake_casing for naming the following:

  • Locals
  • Variables
  • Outputs
  • Resources (symbolic names)
  • Modules (symbolic names)

For example: snake_casing_example (every word in lowercase, with each word separated by an underscore _)




ID: TFNFR5 - Category: Testing - Test Tooling

Module owners MUST use the below tooling for unit/linting/static/security analysis tests. These are also used in the AVM Compliance Tests.




ID: TFNFR6 - Category: Code Style - Resource & Data Order

For the definition of resources in the same file, the resources be depended on come first, after them are the resources depending on others.

Resources have dependencies should be defined close to each other.




ID: TFNFR7 - Category: Code Style - count & for_each Use


We can use count and for_each to deploy multiple resources, but the improper use of count can lead to anti pattern.

You can use count to create some kind of resources under certain conditions, for example:

resource "azurerm_network_security_group" "this" {
  count               = local.create_new_security_group ? 1 : 0
  name                = coalesce(var.new_network_security_group_name, "${var.subnet_name}-nsg")
  resource_group_name = var.resource_group_name
  location            = local.location
  tags                = var.new_network_security_group_tags
}

The module’s owners MUST use map(xxx) or set(xxx) as resource’s for_each collection, the map’s key or set’s element MUST be static literals.

Good example:

resource "azurerm_subnet" "pair" {
  for_each             = var.subnet_map // `map(string)`, when user call this module, it could be: `{ "subnet0": "subnet0" }`, or `{ "subnet0": azurerm_subnet.subnet0.name }`
  name                 = "${each.value}"-pair
  resource_group_name  = azurerm_resource_group.example.name
  virtual_network_name = azurerm_virtual_network.example.name
  address_prefixes     = ["10.0.1.0/24"]
}

Bad example:

resource "azurerm_subnet" "pair" {
  for_each             = var.subnet_name_set // `set(string)`, when user use `toset([azurerm_subnet.subnet0.name])`, it would cause an error.
  name                 = "${each.value}"-pair
  resource_group_name  = azurerm_resource_group.example.name
  virtual_network_name = azurerm_virtual_network.example.name
  address_prefixes     = ["10.0.1.0/24"]
}



ID: TFNFR8 - Category: Code Style - Resource & Data Block Orders

There are 3 types of assignment statements in a resource or data block: argument, meta-argument and nested block. The argument assignment statement is a parameter followed by =:

location = azurerm_resource_group.example.location

or:

tags = {
  environment = "Production"
}

Nested block is a assignment statement of parameter followed by {} block:

subnet {
  name           = "subnet1"
  address_prefix = "10.0.1.0/24"
}

Meta-arguments are assignment statements can be declared by all resource or data blocks. They are:

  • count
  • depends_on
  • for_each
  • lifecycle
  • provider

The order of declarations within resource or data blocks is:

All the meta-arguments should be declared on the top of resource or data blocks in the following order:

  1. provider
  2. count
  3. for_each

Then followed by:

  1. required arguments
  2. optional arguments
  3. required nested blocks
  4. optional nested blocks

All ranked in alphabetical order.

These meta-arguments should be declared at the bottom of a resource block with the following order:

  1. depends_on
  2. lifecycle

The parameters of lifecycle block should show up in the following order:

  1. create_before_destroy
  2. ignore_changes
  3. prevent_destroy

parameters under depends_on and ignore_changes are ranked in alphabetical order.

Meta-arguments, arguments and nested blocked are separated by blank lines.

dynamic nested blocks are ranked by the name comes after dynamic, for example:

  dynamic "linux_profile" {
    for_each = var.admin_username == null ? [] : ["linux_profile"]

    content {
      admin_username = var.admin_username

      ssh_key {
        key_data = replace(coalesce(var.public_ssh_key, tls_private_key.ssh[0].public_key_openssh), "\n", "")
      }
    }
  }

This dynamic block will be ranked as a block named linux_profile.

Code within a nested block will also be ranked following the rules above.

PS: You can use avmfix tool to reformat your code automatically.




ID: TFNFR9 - Category: Code Style - Module Block Order

The meta-arguments below should be declared on the top of a module block with the following order:

  1. source
  2. version
  3. count
  4. for_each

blank lines will be used to separate them.

After them will be required arguments, optional arguments, all ranked in alphabetical order.

These meta-arguments below should be declared on the bottom of a resource block in the following order:

  1. depends_on
  2. providers

Arguments and meta-arguments should be separated by blank lines.




ID: TFNFR10 - Category: Code Style - No Double Quotes in ignore_changes

Good example:

lifecycle {
    ignore_changes = [
      tags,
    ]
}

Bad example:

lifecycle {
    ignore_changes = [
      "tags",
    ]
}



ID: TFNFR11 - Category: Code Style - Null Comparison Toggle

Sometimes we need to ensure that the resources created compliant to some rules at a minimum extent, for example a subnet has to connected to at least one network_security_group. The user may pass in a security_group_id and ask us to make a connection to an existing security_group, or want us to create a new security group.

Intuitively, we will define it like this:

variable "security_group_id" {
  type = string
}

resource "azurerm_network_security_group" "this" {
  count               = var.security_group_id == null ? 1 : 0
  name                = coalesce(var.new_network_security_group_name, "${var.subnet_name}-nsg")
  resource_group_name = var.resource_group_name
  location            = local.location
  tags                = var.new_network_security_group_tags
}

The disadvantage of this approach is if the user create a security group directly in the root module and use the id as a variable of the module, the expression which determines the value of count will contain an attribute from another resource, the value of this very attribute is “known after apply” at plan stage. Terraform core will not be able to get an exact plan of deployment during the “plan” stage.

You can’t do this:

resource "azurerm_network_security_group" "foo" {
  name                = "example-nsg"
  resource_group_name = "example-rg"
  location            = "eastus"
}

module "bar" {
  source = "xxxx"
  ...
  security_group_id = azurerm_network_security_group.foo.id
}

For this kind of parameters, wrapping with object type is recommended:

variable "security_group" {
  type = object({
    id   = string
  })
  default     = null
}

The advantage of doing so is encapsulating the value which is “known after apply” in an object, and the object itself can be easily found out if it’s null or not. Since the id of a resource cannot be null, this approach can avoid the situation we are facing in the first example, like the following:

resource "azurerm_network_security_group" "foo" {
  name                = "example-nsg"
  resource_group_name = "example-rg"
  location            = "eastus"
}

module "bar" {
  source = "xxxx"
  ...
  security_group = {
    id = azurerm_network_security_group.foo.id
  }
}

Please use this technique under this use case only.




ID: TFNFR12 - Category: Code Style - Dynamic for Optional Nested Objects

An example from the community:

resource "azurerm_kubernetes_cluster" "main" {
  ...
  dynamic "identity" {
    for_each = var.client_id == "" || var.client_secret == "" ? [1] : []

    content {
      type                      = var.identity_type
      user_assigned_identity_id = var.user_assigned_identity_id
    }
  }
  ...
}

Please refer to the coding style in the example. If you just want to declare some nested block under conditions, please use:

for_each = <condition> ? [<some_item>] : []



ID: TFNFR13 - Category: Code Style - Default Values with coalesce/try

The following example shows how to use "${var.subnet_name}-nsg" when var.new_network_security_group_name is null or ""

Good examples:

coalesce(var.new_network_security_group_name, "${var.subnet_name}-nsg")
try(coalesce(var.new_network_security_group.name, "${var.subnet_name}-nsg"), "${var.subnet_name}-nsg")

Bad examples:

var.new_network_security_group_name == null ? "${var.subnet_name}-nsg" : var.new_network_security_group_name)



ID: TFNFR14 - Category: Inputs - Not allowed variables

Since Terraform 0.13, count, for_each and depends_on are introduced for modules, module development is significantly simplified. Module’s owners MUST NOT add variables like enabled or module_depends_on to control the entire module’s operation. Boolean feature toggles are acceptable however.




ID: TFNFR15 - Category: Code Style - Variable Definition Order

Input variables should follow this order:

  1. All required fields, in alphabetical order
  2. All optional fields, in alphabetical order

A variable without default value is a required field, otherwise it’s an optional one.




ID: TFNFR16 - Category: Code Style - Variable Naming Rules

The naming of a variable should follow HashiCorp’s naming rule.

variable used as feature switches should use positive statement, use xxx_enabled instead of xxx_disabled. Avoid double negatives like !xxx_disabled.

Please use xxx_enabled instead of xxx_disabled as name of a variable.




ID: TFNFR17 - Category: Code Style - Variables with Descriptions

The target audience of description is the module users.

For a newly created variable (Eg. variable for switching dynamic block on-off), it’s description should precisely describe the input parameter’s purpose and the expected data type. description should not contain any information for module developers, this kind of information can only exist in code comments.

For object type variable, description can be composed in HEREDOC format:

variable "kubernetes_cluster_key_management_service" {
  type = object({
    key_vault_key_id         = string
    key_vault_network_access = optional(string)
  })
  default     = null
  description = <<-EOT
  - `key_vault_key_id` - (Required) Identifier of Azure Key Vault key. See [key identifier format](https://learn.microsoft.com/en-us/azure/key-vault/general/about-keys-secrets-certificates#vault-name-and-object-name) for more details. When Azure Key Vault key management service is enabled, this field is required and must be a valid key identifier. When `enabled` is `false`, leave the field empty.
  - `key_vault_network_access` - (Optional) Network access of the key vault Network access of key vault. The possible values are `Public` and `Private`. `Public` means the key vault allows public access from all networks. `Private` means the key vault disables public access and enables private link. Defaults to `Public`.
EOT
}



ID: TFNFR18 - Category: Code Style - Variables with Types

type MUST be defined for every variable. type should be as precise as possible, any can only be defined with adequate reasons.

  • Use bool instead of string or number for true/false
  • Use string for text
  • Use concrete object instead of map(any)



ID: TFNFR19 - Category: Code Style - Sensitive Data Variables

If variable’s type is object and contains one or more fields that would be assigned to a sensitive argument, then this whole variable should be declared as sensitive = true, otherwise you should extract sensitive field into separated variable block with senstive = true.




ID: TFNFR20 - Category: Code Style - Non-Nullable Defaults for collection values

Nullable SHOULD be set to false for collection values (e.g. sets, maps, lists) when using them in loops. However for scalar values like string and number, a null value MAY have a semantic meaning and as such these values are allowed.




ID: TFNFR21 - Category: Code Style - Discourage Nullability by Default

Avoid nullable = true.




ID: TFNFR22 - Category: Code Style - Avoid sensitive = false

Avoid sensitive = false.




ID: TFNFR23 - Category: Code Style - Sensitive Default Value Conditions

Setting a default value for a sensitive input is not permitted, e.g. a default password.




ID: TFNFR24 - Category: Code Style - Handling Deprecated Variables

Sometimes we will find names for some variable are not suitable anymore, or a change should be made to the data type. We want to ensure forward compatibility within a major version, so direct changes are strictly forbidden. The right way to do this is move this variable to an independent deprecated_variables.tf file, then redefine the new parameter in variable.tf and make sure it’s compatible everywhere else.

Deprecated variable must be annotated as DEPRECATED at the beginning of the description, at the same time the replacement’s name should be declared. E.g.

variable "enable_network_security_group" {
  type        = string
  default     = null
  description = "DEPRECATED, use `network_security_group_enabled` instead; Whether to generate a network security group and assign it to the subnet. Changing this forces a new resource to be created."
}

A cleanup of deprecated_variables.tf can be performed during a major version release.




ID: TFNFR25 - Category: Code Style - Verified Modules Requirements

The terraform.tf file must only contain one terraform block.

The first line of the terraform block must define a required_version property for the Terraform CLI.

The required_version property must include a constraint on the minimum version of the Terraform CLI. Previous releases of the Terraform CLI can have unexpected behaviour.

The required_version property must include a constraint on the maximum major version of the Terraform CLI. Major version releases of the Terraform CLI can introduce breaking changes and MUST be tested.

The required_version property constraint can use the ~> #.# or the >= #.#.#, < #.#.# format.

Note: You can read more about Terraform version constraints in the documentation.

Example terraform.tf file:

terraform {
  required_version = "~> 1.6"
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = "~> 3.11"
    }
  }
}



ID: TFNFR26 - Category: Code Style - Providers in required_providers

The terraform block in terraform.tf must contain the required_providers block.

Each provider used directly in the module must be specified with the source and version properties. Providers in the required_providers block should be sorted in alphabetical order.

Do not add providers to the required_providers block that are not directly required by this module. If submodules are used then each submodule should have its own versions.tf file.

The source property must be in the format of namespace/name. If this is not explicity specified, it can cause failure.

The version property must include a constraint on the minumum version of the provider. Older provider versions may not work as expected.

The version property must include a constraint on the maximum major version. A provider major version release may introduce breaking change, so updates to the major version constraint for a provider MUST be tested.

The version property constraint can use the ~> #.# or the >= #.#.#, < #.#.# format.

Note: You can read more about Terraform version constraints in the documentation.

Good examples:

terraform {
  required_version = "~> 1.6"
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = "~> 3.0"
    }
  }
}
terraform {
  required_version = ">= 1.6.6, < 2.0.0"
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = ">= 3.11.1, < 4.0.0"
    }
  }
}
terraform {
  required_version = ">= 1.6, < 2.0"
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = ">= 3.11, < 4.0"
    }
  }
}

Acceptable example (but not recommended):

terraform {
  required_version = "1.6"
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = "3.11"
    }
  }
}

Bad example:

terraform {
  required_version = ">= 1.6"
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = ">= 3.11"
    }
  }
}



ID: TFNFR27 - Category: Code Style - Provider Declarations in Modules

By rules, in the module code provider cannot be declared. The only exception is when the module indeed need different instances of the same kind of provider(Eg. manipulating resources across different locations or accounts), you MUST declare configuration_aliases in terraform.required_providers. See details in this document.

provider block declared in the module can only be used to differentiate instances used in resource and data. Declaration of fields other than alias in provider block is strictly forbidden. It could lead to module users unable to utilize count, for_each or depends_on. Configurations of the provider instance should be passed in by the module users.

Good examples:

In verified module:

terraform {
  required_providers {
    azurerm = {
      source  = "hashicorp/azurerm"
      version = "~> 3.0"
      configuration_aliases = [ azurerm.alternate ]
    }
  }
}

In the root module where we call this verified module:

provider "azurerm" {
  features {}
}

provider "azurerm" {
  alias = "alternate"
  features {}
}

module "foo" {
  source = "xxx"
  providers = {
    azurerm = azurerm
    azurerm.alternate = azurerm.alternate
  }
}

Bad example:

In verified module:

provider "azurerm" {
  # Configuration options
  features {}
}



ID: TFNFR28 - Category: Code Style - Provider Declarations in Modules




ID: TFNFR29 - Category: Code Style - Sensitive Data Outputs




ID: TFNFR30 - Category: Code Style - Handling Deprecated Outputs

Sometimes we notice that the name of certain output is not appropriate anymore, however, since we have to ensure forward compatibility in the same major version, it’s not allowed to change the name directly. We need to move it to an independent deprecated_outputs.tf file, then redefine a new output in output.tf and make sure it’s compatible everywhere else in the module.

A cleanup can be performed to deprecated_outputs.tf and other logics related to compatibility during a major version upgrade.




ID: TFNFR31 - Category: Code Style - locals.tf for Locals Only

In locals.tf file we could declare multiple locals blocks, but only locals blocks are allowed.

You MAY declare locals blocks next to a resource block or data block for some advanced scenarios, like making a fake module to execute some light-weight tests aimed at the expressions.




ID: TFNFR32 - Category: Code Style - Alphabetical Local Arrangement




ID: TFNFR33 - Category: Code Style - Precise Local Types

Good example:

{
  name = "John"
  age  = 52
}

Bad example:

{
  name = "John"
  age  = "52" # age should be number
}



ID: TFNFR34 - Category: Code Style - Using Feature Toggles

E.g., our previous release was v1.2.1, now we’d like to submit a pull request which contains such new resource:

resource "azurerm_route_table" "this" {
  location            = local.location
  name                = coalesce(var.new_route_table_name, "${var.subnet_name}-rt")
  resource_group_name = var.resource_group_name
}

A user who’s just upgraded the module’s version would be surprised to see a new resource to be created in a newly generated plan file.

A better approach is adding a feature toggle to be turned off by default:

variable "create_route_table" {
  type     = bool
  default  = false
  nullable = false
}

resource "azurerm_route_table" "this" {
  count               = var.create_route_table ? 1 : 0
  location            = local.location
  name                = coalesce(var.new_route_table_name, "${var.subnet_name}-rt")
  resource_group_name = var.resource_group_name
}

Similarly, when adding a new argument assignment in a resource block, we should use the default value provided by the provider’s schema or null. We should use dynamic block with default omitted configuration when adding a new nested block inside a resource block.




ID: TFNFR35 - Category: Code Style - Reviewing Potential Breaking Changes

Potential breaking(surprise) changes introduced by resource block

  1. Adding a new resource without count or for_each for conditional creation, or creating by default
  2. Adding a new argument assignment with a value other than the default value provided by the provider’s schema
  3. Adding a new nested block without making it dynamic or omitting it by default
  4. Renaming a resource block without one or more corresponding moved blocks
  5. Change resource’s count to for_each, or vice versa

Terraform moved block could be your cure.

Potential breaking changes introduced by variable and output blocks

  1. Deleting(Renaming) a variable
  2. Changing type in a variable block
  3. Changing the default value in a variable block
  4. Changing variable’s nullable to false
  5. Changing variable’s sensitive from false to true
  6. Adding a new variable without default
  7. Deleting an output
  8. Changing an output’s value
  9. Changing an output’s sensitive value

These changes do not necessarily trigger breaking changes, but they are very likely to, they MUST be reviewed with caution.




ID: TFNFR36 - Category: Code Style - Setting prevent_deletion_if_contains_resources

From Terraform AzureRM 3.0, the default value of prevent_deletion_if_contains_resources in provider block is true. This will lead to an unstable test(because the test subscription has some policies applied and they will add some extra resources during the run, which can cause failures during destroy of resource groups).

Since we cannot guarantee our testing environment won’t be applied some Azure Policy Remediation Tasks in the future, for a robust testing environment, please explicitly set prevent_deletion_if_contains_resources to false.




ID: TFNFR37 - Category: Code Style - Tool Usage by Module Owner

newres is a command-line tool that generates Terraform configuration files for a specified resource type. It automates the process of creating variables.tf and main.tf files, making it easier to get started with Terraform and reducing the time spent on manual configuration.

Module owners are encouraged to use newres when they’re trying to add new resource block, attribute, or nested block. They may generate the whole block along with the corresponding variable blocks in an empty folder, then copy-paste the parts they need with essential refactorings.